Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: canewb on October 10, 2021, 10:14:10 PM

Title: E-STOP ESS PORT AND PIN number
Post by: canewb on October 10, 2021, 10:14:10 PM

I do not have access to my MACH manuals.
Can anyone tell me the correct PORT and PIN number for  ESS E-STOP .
I believe it should be port 1, pin 10.

Title: Re: E-STOP ESS PORT AND PIN number
Post by: Steve Stallings on October 10, 2021, 11:01:50 PM

The ESS can work with E-Stop on any pin, as can Mach. It is the the machine wiring and breakout board that determine which pin should be used. Port 1, pin 10 is a popular choice used by many breakout boards.