Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: canewb on October 09, 2021, 06:38:39 PM

Title: LINE 0: NO SPINDLE SPEED SET IN G95 MODE
Post by: canewb on October 09, 2021, 06:38:39 PM

Why do I get this error when I do not control the spindle with Mach4 ?
And, I do not see a G95 entry in the .TAP file

Title: Re: LINE 0: NO SPINDLE SPEED SET IN G95 MODE
Post by: thosj on October 13, 2021, 06:43:28 PM

Just for curiosities sake, change S 24000 to S24000.

G95 is Feed per revolution mode. usually used on lathes. You likely aren't using feed per revolution with feeds of F50.0 and F20.0 at 24000 RPM's!!