Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Bourbonator on September 26, 2021, 04:13:35 PM

Title: Homing a TAIG3000DSLS
Post by: Bourbonator on September 26, 2021, 04:13:35 PM

Howdy, folks!

New member, second post (first is in the 'welcome' section), looking for a quick answer.

I just bought and assembled a TAIG 3000DSLS w/ 4th axis, installed the .DLL and their profile, and their instructions say to hit the 'home all' button, but nothing happens.  I'm able to jog all the axes, but the homing just doesn't work.  My previous machine (a MaxNC 15CL) would travel to the limits, 'bounce' off the switch twice and zero.  Not working on my TAIG.  Can someone help?

Thanks in advance!

Title: Re: Homing a TAIG3000DSLS
Post by: Graham Waterworth on September 26, 2021, 04:16:08 PM

Post your XML file so we can see the setting and work out what is going on.

Title: Re: Homing a TAIG3000DSLS
Post by: Bourbonator on September 26, 2021, 04:35:38 PM

Yowza!  Wasn't expecting a reply so quickly.  Thanks!

Title: Re: Homing a TAIG3000DSLS
Post by: Graham Waterworth on September 26, 2021, 04:51:14 PM

You have no home switches set up in your ports & pins that is why its not homing

Title: Re: Homing a TAIG3000DSLS
Post by: Bourbonator on October 06, 2021, 10:41:15 AM

Graham, thanks so much for your help.  I was able to reach the TAIG folks and we got it sorted out.  Everything is working now.  Just waiting for some new tooling so I can get started!

Be prepared for more inane questions.   :o