Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Toshio.K on September 12, 2021, 10:51:25 PM

Title: Please tell me about INDEX.
Post by: Toshio.K on September 12, 2021, 10:51:25 PM
Hello everyone.
I'm currently experimenting with Mach4 Hobby.
Please tell me about INDEX.
You can check the INDEX signal in "Diagnostics",
The red frame does not blink.
Could I ask the reason?
Please tell me the solution.

Mach4 is set as shown in the picture of ESS_Config.
Title: Re: Please tell me about INDEX.
Post by: Toshio.K on September 13, 2021, 05:55:30 AM
In the case of Mach4, isn't the spindle speed signal INDEX?