Machsupport Forum

Mach Discussion => Mach3 under Vista => Topic started by: bando on September 01, 2021, 05:31:46 PM

Title: GCODE crashes
Post by: bando on September 01, 2021, 05:31:46 PM

Hello, I have a problem that I do not understand what happens. The last time I used the machine with Mach3 was 2 years ago and it worked perfectly (nothing was modified). Now when loading a file the toolpath looks correct and the g-code as well. When you press reset to start working the code gets corrupted and the toolpath only shows a few steps.

Title: Re: GCODE crashes
Post by: Tweakie.CNC on September 02, 2021, 12:58:14 AM

I have sent you a PM.

Tweakie.