Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: aroff on August 16, 2021, 05:34:02 PM

Title: atc spindle test crashes into the tool holder rack
Post by: aroff on August 16, 2021, 05:34:02 PM

avid cnc with cncdepot atc & mach4
setup the m6 file with all the parameters
when I do a air cut it goes over to the rack and hits it. instead of raising up to clear it first
in the m6 file Z is the actual spot where the spindle goes to park the holder
is this wrong