Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: tvgeist on July 26, 2021, 08:30:01 AM

Title: Need Help
Post by: tvgeist on July 26, 2021, 08:30:01 AM

I just bought a Hobby CNC unit with Mach3. It was set up for MM units. I need to change it to imperial. Will I have to recalibrate to the software to the machine? I'm new at this and would like some help.

Title: Re: Need Help
Post by: Tweakie.CNC on July 26, 2021, 09:43:35 AM

The Mach3 manual can be found here;

https://www.machsupport.com/wp-content/uploads/2013/02/Mach3Mill_Install_Config.pdf

Section 5.4 of the manual details the units set-up (or change of units) and what you will have to do.

Tweakie.