Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: gadget47 on July 09, 2021, 05:12:35 PM

Title: mach 4 ignoring M5 command in g code
Post by: gadget47 on July 09, 2021, 05:12:35 PM

greetings, i have mach4 hobby, was recently on phone support to correct some issues, now i have another that has popped up. when running g code, mach sees the M3 command and turns on the spindle- when program comes to the end ,the M5 command is ignored and I have to shut off the spindle with either the stop button or the spindle control button. any help?