Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Stuart on June 20, 2021, 11:45:34 AM

Title: advice please re. mach4 version
Post by: Stuart on June 20, 2021, 11:45:34 AM

as above
I have had a complete pc failure dead MB and HDD so a dip into the pension and a new pc I7 with 16gb and a512  SSD arrived in the workshop
I have set it up with the latest release ver of Industrial got it set up and licensed OK

My question is what is the recommended version Quote from warp9td "Compiled against Mach4 4720 (Mach4 Recommended) but 4612 is still the version checked for"

is that version Ok or what is the best

thanks in advance

Title: Re: advice please re. mach4 version
Post by: Wallerawang on June 20, 2021, 05:14:16 PM

Hi Stuart
I did two jobs yesterday with 4720 and it worked great for me.
Steve

Title: Re: advice please re. mach4 version
Post by: Stuart on June 21, 2021, 02:07:29 AM

Thanks for the info

are the DRO on the offset page OK

Title: Re: advice please re. mach4 version
Post by: Wallerawang on June 21, 2021, 08:28:56 PM

Hi Stuart
I did the update to get the latest TMC3in1 plasma plugin, I didn't do any tests but run a few jobs to confirm it worked. Which it did fine.
Steve

Title: Re: advice please re. mach4 version
Post by: Stuart on June 22, 2021, 07:08:27 AM

thanks

Title: Re: advice please re. mach4 version
Post by: GOOMBA on June 22, 2021, 02:19:44 PM

Hello Stuart,
Try the DRO's out on the new build and if you see anything wrong with how they update let me know (private message) and I'll see that it's take care of.
We fixed the on modify scripts a few weeks ago and they should be committed and in the newest releases.
Sorry this has been an issue in the past, hopefully it's all fixed now :)

Title: Re: advice please re. mach4 version
Post by: Stuart on June 22, 2021, 03:38:28 PM

thank you for the reply

I will have a look tomorrow and let you know either way


Stuart