Machsupport Forum

Mach Discussion => Mach4 General Discussion => Mach4 Plugins => Topic started by: rexx42 on June 06, 2021, 10:39:42 AM

Title: Mach 4 and Pokeys MPG
Post by: rexx42 on June 06, 2021, 10:39:42 AM

Having an issue with an MPG connected thru PoKeys.  When the increment is set to 1.0000 or 0.1000 the axis starts to move but then almost immediately returns to its starting point.  Sometimes it even goes back more in the opposite direction I am trying to move it.  The MPG is connected to pins 1 and 2 of the Pokeys as directed in the PO Keys manual.  Has anyone else seen this?

Title: Re: Mach 4 and Pokeys MPG
Post by: Wallerawang on June 06, 2021, 07:22:51 PM

Hi rexx42
Can you check your counts per detent is set correctly - most are 4 counts per detent.
Steve

Title: Re: Mach 4 and Pokeys MPG
Post by: Student on November 16, 2022, 10:29:07 AM

I have the same problem. How do you solved it?