Machsupport Forum

Mach Discussion => Mach Screens => Topic started by: Tarak on October 12, 2007, 05:54:49 PM

Title: Setting a toolpath to Turning control problem.
Post by: Tarak on October 12, 2007, 05:54:49 PM
Hi Guys, any idea why when I set a toolpath display to Turning control, it won't stay checked as turning control, BTW I'm using screen4.
So obviously it won't display as turning control, or am I missing something?
On that note, how can I use the toolpath to display as X Ø, Z left to right and A as the chuck, or is this exactly what the turning control does?
Title: Re: Setting a toolpath to Turning control problem.
Post by: drew on October 19, 2007, 11:41:19 PM
I have converted a mill screen to a lathe screen that has 5 pages with toolpath displays. None of the toolpaths stay checked but 3 of then work fine 2 of them show nothing.  My problem could be the transparent layer in the frame but I not sure.
Drew