Machsupport Forum

General CNC Chat => Share Your GCode => Topic started by: N4NV on January 29, 2021, 07:32:13 PM

Title: Rose type index
Post by: N4NV on January 29, 2021, 07:32:13 PM

The G-code is for a Rose type index made from a 2.5" square by 1.125" thick block of aluminum.  The code will leave 4 pillars on the corners what will need to be removed.  There is a video for it here: https://youtu.be/0nXZ0EuFDRk

Vince

Title: Re: Rose type index
Post by: Bornbalch on January 15, 2024, 05:37:58 PM

Thanks m8