Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Bruce Hodgkins on November 27, 2020, 07:59:32 PM

Title: Spindle won't run
Post by: Bruce Hodgkins on November 27, 2020, 07:59:32 PM

 >:(  Have bought 6040est I have set it up and ran roadrunner test g code now the spindle won't run through the pc any thoughts?  Bruce

Title: Re: Spindle won't run
Post by: Graham Waterworth on November 27, 2020, 08:03:50 PM

Is it 0-10 volt analogue or just on/off by relay?

Title: Re: Spindle won't run
Post by: Bruce Hodgkins on November 27, 2020, 08:49:21 PM

Sorry bit above my pay grade Spindle runs through a VFD. I have set up Mach 3 as per chinese instructions and it seemed to be behaving itself. It finished off the roadrunner. Now I cannot set the spindle speed just zeros all the time

Title: Re: Spindle won't run
Post by: Graham Waterworth on November 27, 2020, 08:54:10 PM

We need more to work on, some pictures of the vfd, settings and the inputs/outputs will help