Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Bill_O on September 11, 2020, 03:19:11 PM

Title: cv not staying on
Post by: Bill_O on September 11, 2020, 03:19:11 PM

I set up Mach4 and used the cv wizard.
Turned CV On and it works great.
Restarted Mach4 and cv settings are not working and all at 0
How do I make Mach4 stay in CV On?

Bill

Title: Re: cv not staying on
Post by: Graham Waterworth on September 11, 2020, 04:21:28 PM

You could add the G64 into the initialisation string in the config screen or put it at the start of your code.

Title: Re: cv not staying on
Post by: Bill_O on September 11, 2020, 04:37:38 PM

Graham,

I have G64 in the start of my files.
The CV settings are not staying after exit.

Bill

Title: Re: cv not staying on
Post by: Bill_O on September 18, 2020, 05:55:56 PM

If anyone else needs to know I got this resolved from Newfangled
There are 2 different cv wizards.
Make sure you use mcCvDistToleranceV001.
Works great and keeps the cv on and the data it calculated.
Thanks Trevor from Newfangled.

Bill