Machsupport Forum

Third party software and hardware support forums. => Third party software and hardware support forums. => Topic started by: Start_Anew on July 13, 2020, 11:11:39 AM

Title: Suggestions on Spindle
Post by: Start_Anew on July 13, 2020, 11:11:39 AM

Hi there,

I was wondering if anyone had any ideas on a 2.2 Kw spindle that has either UL or CSA approved certification? We're trying to build a CNC for our professor, and if anyone has previously bought one and could link it, it would be greatly appreciated.

Thank you,

Starting_Anew

Title: Re: Suggestions on Spindle
Post by: joeaverage on August 16, 2020, 07:05:24 AM

Hi,
I use a spindle by a German manufacturer Mechatron GmbH:

https://www.mechatron-gmbh.de/en/ (https://www.mechatron-gmbh.de/en/)

Great quality but not cheap.

This Chinese manufacturer has a good range and good quality but not the ultra low prices you might
expect from a Chinese maker, you just don't get quality without having to pay up:

http://www.jian-ken.com/ (http://www.jian-ken.com/)

Craig