Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: wwwdot on July 01, 2020, 01:58:36 PM

Title: Can't jog off limit switch
Post by: wwwdot on July 01, 2020, 01:58:36 PM

Hi
New to cnc but just finished converting my hobby mill.

Just fitted proximity switches to all axis. They work fine but I can't jog off them without moving the switches. I have auto override on in the settings screen and have increased the debounce to 2000 but still no joy. Controller is a Novasun ethernet one. Works fine so far but the manual is a bit limited. Any ideas ?


www dot

Title: Re: Can't jog off limit switch
Post by: Tweakie.CNC on July 02, 2020, 12:53:15 AM

Hi www dot,

Unfortunately Novusun is one of the businesses whose products are not supported by the forum. This thread refers; https://www.machsupport.com/forum/index.php?topic=24331.0

Tweakie.