Machsupport Forum

Third party software and hardware support forums. => PoKeys => Topic started by: peter81 on June 15, 2020, 01:44:55 PM

Title: Pokeys relay connect
Post by: peter81 on June 15, 2020, 01:44:55 PM

Hello,

I have a question on how to connect this relay board to pokeys 57U?

https://www.aliexpress.com/item/32742580606.html?spm=a2g0o.detail.1000014.5.ad9234f8FAHLEW&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.170519.0&scm_id=1007.13338.170519.0&scm-url=1007.13338.170519.0&pvid=26d24722-bf3d-4169-b5b7-cc3d28ac0996&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.13338.170519.0,pvid:26d24722-bf3d-4169-b5b7-cc3d28ac0996,tpp_buckets:668%230%23170728%234_668%23808%234093%237_668%23888%233325%2316_668%232846%238114%23795_668%232717%237562%23446

Do I simply wire the output from pokeys to In1, In2,...?
Thanks for help.

Regards,
Peter

Title: Re: Pokeys relay connect
Post by: gabedrummin on July 23, 2021, 12:16:53 PM

One side of the relay is connected to your Pokeys device and the other side is connected to what you want to operate . What are you trying to turn on and off with the relay  ?