Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: geckocycles on May 28, 2020, 08:00:29 AM

Title: gcode box empty
Post by: geckocycles on May 28, 2020, 08:00:29 AM

When I load a GCode the dialog box stays empty all of a sudden. If I double click the empty box I will get numbered lines but no other text in the box.
Not sure what I did to make this happen.

Title: Re: gcode box empty
Post by: geckocycles on June 07, 2020, 01:42:55 PM

Thanks for the help. I cured the problem, got Acorn and making parts in a day after getting a new C86 board.