Machsupport Forum

General CNC Chat => Building or Buying a Wood routing table.. Beginnners guide.. => Topic started by: Hardkiffeur on May 16, 2020, 01:49:08 PM

Title: Want to upgrade my Chineese CNC for a mach4 total compiliance, but how ?
Post by: Hardkiffeur on May 16, 2020, 01:49:08 PM

Hi all,
What I've got : https://www.china-cncrouter.com//downfile/2020040909542955951.pdf
With the XHC MK4-M4 (just test Three time the installation from the cdxhctech manual : NoWay !)
I've a boxe that i can upgrade for the goal : Have a cnc run with Mach4,
this is the first step for me before lost time to try with this motion board and have this cnc on the road ;)

I've some spec for the machine :
X,Y axe with OUKEDA Motors : OK86STH80-5004
Z : Stepping Motor 57BYGH76-401B : 1.8° / 3A / 1.8 N.m
A : Stepping Motor 57BYGH56-401B : 1.8° / 2.8A / 1.2 N.m
Spindle : GDZ-80 2.2 Diam80X213 / 220V / 400Hz / 2.2 Kw / 5A
OK2D542 microstep NEMA23 NEMA17 4.2A 48 V


What I want a real box .... with manual .... informations for trying the rest of the machine.
Thanks for the time and all returns

Nold

Title: Re: Want to upgrade my Chineese CNC for a mach4 total compiliance, but how ?
Post by: Hardkiffeur on May 16, 2020, 02:07:39 PM

Just for information if this change something : I want to install mach4 on my laptop under win10Pro/64bits

Title: Re: Want to upgrade my Chineese CNC for a mach4 total compiliance, but how ?
Post by: Graham Waterworth on May 16, 2020, 03:24:19 PM

ESS Smoothstepper will do all you need.

Title: Re: Want to upgrade my Chineese CNC for a mach4 total compiliance, but how ?
Post by: Hardkiffeur on May 18, 2020, 04:31:10 AM

OKso just order this one : https://www.cncroom.com/interface-cards/ess-mb3?zenid=tg432p9f24g44mg24kfek45sq1
A combinaison of ESS from warp9td and the MB3 bob .... Seems good documentation on it and from other posts good rates !

Thanks and I'll be back for having help for connection wiring and configuration !
Now have to take the Mach4 licence ;)