Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Gary.S on May 02, 2020, 02:21:42 AM

Title: Problem with Mach3 Image when loading up G code.
Post by: Gary.S on May 02, 2020, 02:21:42 AM

Hi All,

I'm new to the C'N'C and have a system that is using the Mach3 program.
I have a lot of G code programs  but every time i load it up the image in mach3 is off the table at the bottom and you can't see it.
Not sure what i have done or it's something to do with the coding. I have tired many different ones and the same result. Any help would be great.
My father In-law had it working great and it's been handed down to me as he has passed away and i didn't get enough time to learn how to use it before hand.
If you can suggest any courses i could take to help me learn would be a plus.
Thanks again for any help.
Please see attached picture.



Cheers Gary.

Title: Re: Problem with Mach3 Image when loading up G code.
Post by: TPS on May 02, 2020, 02:48:50 AM

can you pls. post one of the gcode files?

Title: Re: Problem with Mach3 Image when loading up G code.
Post by: Gary.S on May 06, 2020, 12:02:12 AM

ok i will try and post the G code if that helps

Title: Re: Problem with Mach3 Image when loading up G code.
Post by: Gary.S on May 06, 2020, 12:05:54 AM

attached is one G code

Title: Re: Problem with Mach3 Image when loading up G code.
Post by: TPS on May 06, 2020, 03:43:42 AM

it is working here

try to Change Display mode and the Regen Toolpath.