Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Maquinerocnc on February 02, 2020, 07:47:18 AM

Title: end of career and mach3
Post by: Maquinerocnc on February 02, 2020, 07:47:18 AM

Hello friends, I recently bought a cnc, I have a problem with mach3 when I refer the engines to zero the engines do not stop and it's time to hit the emergency button. I thought they were the end of career sensors, but when I move the machine with the keyboard to the limits if the sensors are activated, it only happens when I give it all the axes to zero. why is this happening?

Title: Re: end of career and mach3
Post by: ZASto on February 02, 2020, 08:58:03 AM

How are configured your limit/home switches in Ports&Pins?
Something like this:

Title: Re: end of career and mach3
Post by: Pythonsoft on February 02, 2020, 11:15:44 AM

hi no I only have home limits checked not the +++ and -- but the home buttons are set the same

Title: Re: end of career and mach3
Post by: Pythonsoft on February 02, 2020, 12:55:04 PM

should I check the +++ and the ---- boxes aswell ????

Title: Re: end of career and mach3
Post by: Maquinerocnc on February 02, 2020, 02:16:04 PM

thanks for answering, my board is an mks-v in the attached image is how I have it configured

Title: Re: end of career and mach3
Post by: Pythonsoft on February 02, 2020, 03:51:28 PM

yes this as mine is set in ports and pins