Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: alextulanov@gmail.com on January 21, 2020, 05:03:08 AM

Title: Problem with calibration of axises
Post by: alextulanov@gmail.com on January 21, 2020, 05:03:08 AM

Hello All!

My name is Alex,

I have start work with new China CNC machine,
I installed the program MACH3 and configured lik it was write in manual instruction.
But it dos't work correct.
For example i want to did pockets diameters  10mm, 15mm, 20mm.
But i received 9.92mm, 14.92mm and 19.92mm.
i using SolidWorks CAM, Fusion 360, or  ColidCam 2013
How i can fix it?
In settings calibrate  with " Set Steps per Unit " ?

Thank you for Help!
 

Title: Re: Problem with calibration of axises
Post by: Tweakie.CNC on January 21, 2020, 05:19:12 AM

Quote

In settings calibrate  with " Set Steps per Unit " ?

The calibrate function will confirm that you do (or do not) have the correct steps per unit set for each axis.

Title: Re: Problem with calibration of axises
Post by: alextulanov@gmail.com on January 21, 2020, 06:53:48 AM

Thank you !

Can you explain more or less how i can check correct  number of steps?

Title: Re: Problem with calibration of axises
Post by: TPS on January 21, 2020, 07:11:55 AM

https://www.machsupport.com/forum/index.php?topic=12512.0

https://www.machsupport.com/forum/index.php?action=dlattach;topic=26252.0;attach=36629

Title: Re: Problem with calibration of axises
Post by: alextulanov@gmail.com on January 21, 2020, 07:25:09 AM

THANK YOU!!