Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: wolf32 on January 18, 2020, 12:29:26 AM

Title: mach 4 machine coordinates not showing
Post by: wolf32 on January 18, 2020, 12:29:26 AM

hi

so for some reason when i move my machine around via jogging none of the coordinates change  all they do is flash and switch between positive and negative and might jump to like 0.003mm and thats it, im using a galil 4060 and arunning the latest plugin 

thanks for your help

Title: Re: mach 4 machine coordinates not showing
Post by: smurph on January 19, 2020, 06:52:36 PM

It sounds like you need to install Galil's latest GDK.  Make sure GCAPS is running.

Title: Re: mach 4 machine coordinates not showing
Post by: wolf32 on January 20, 2020, 12:37:50 AM

hi

so i install the GDK only a few weeks ago but im not sure about gcaps as how do i tell if its working correctly as im not finding much information on it

thanks for your help