Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: mgreb on December 27, 2019, 05:53:22 PM

Title: Mach2 Turm with Fusion 360
Post by: mgreb on December 27, 2019, 05:53:22 PM
Is there a Fusion 360 Processor that works with Mach3 turn?
Title: Re: Mach2 Turm with Fusion 360
Post by: mgreb on January 02, 2020, 01:17:44 AM
Found it, all is good
Title: Re: Mach2 Turm with Fusion 360
Post by: Tweakie.CNC on January 02, 2020, 01:30:09 AM
 :)
Title: Re: Mach2 Turm with Fusion 360
Post by: ido on January 05, 2020, 03:06:39 AM
cannot find the correct export file of fusion360 to be operated on the Mach3.
the .cn file produced by fusion 360 does not run on the Mach 3 CNC
Please advise