Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Ric915 on December 05, 2019, 12:54:42 PM

Title: Mach3 working with Punching Machine.
Post by: Ric915 on December 05, 2019, 12:54:42 PM

Hi.

Is it possible the Mach3 to work with a Punching Machine? I'm thinking to do retrofitting in a T180 Trumpf Punching.
But I didn´t some information it.

Title: Re: Mach3 working with Punching Machine.
Post by: Tweakie.CNC on December 06, 2019, 02:12:58 AM

If you are starting out from scratch with this machine conversion then you should be looking at Mach4.