Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: captainleeward on November 25, 2019, 02:52:24 PM

Title: arrow Keys will not move x and y motors see more....... info
Post by: captainleeward on November 25, 2019, 02:52:24 PM

arrow Keys will not move x and y axis motors from the keyboard. motors do jump when first turned on. using the jog function with the tab  does move the x and y axis but only very slowly. no speed control. I have inserted the plug in in the plug in folder. and the other one in the folder
This is a cross fire plasma table using win 7 on a dell laptop computer.  Thanks for looking and helping.
no g-code function either.

Title: Re: arrow Keys will not move x and y motors see more....... info
Post by: isahib@live.com on November 25, 2019, 03:10:09 PM

Hi Buddy

Check if you in continuous or step mode? Also check whats the default feed rate?

Title: Re: arrow Keys will not move x and y motors see more....... info
Post by: captainleeward on November 25, 2019, 05:47:23 PM

continueuis,  can;t find the last one one?