Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: chessie on September 24, 2019, 06:53:04 AM
-
need a bit of help
my fusion pp produces g78 on canned thread and g32 ,on not canned.
i like the wizard in mach3 turn, it produces g76
i tried to get a fusion pp that produces g76 but no luck.
the wizard is good for external ,is it possible to use this for internal ,if so how?
Is there an add on /screenset i can buy that will produce g76 for internal and external threading.
thanks