Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Overloaded on May 16, 2019, 11:02:06 AM

Title: Mach4 TURN screen set
Post by: Overloaded on May 16, 2019, 11:02:06 AM

 :)
Hi folks.
Can some of you Mach4 Turners share what you consider to be the best currently available screen set for Mach4 TURN ?
Thanks,
Russ

Title: Re: Mach4 TURN screen set
Post by: joeaverage on May 16, 2019, 02:34:38 PM

Hi,
to my knowledge there is only one lathe screen set, wxLathe.set, that is issued with Mach4.

No doubt there are many individualized lathe screen sets out there but guess most of them started out as wxLathe.set variants.

Craig