Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: chessie on March 20, 2019, 03:44:49 AM

Title: mach3 turn post processor for solidcam needed
Post by: chessie on March 20, 2019, 03:44:49 AM

does anyone have or know where i can can buy, download a post processor   for mach 3 turn and 2014 solidcam
thanks

Title: Re: mach3 turn post processor for solidcam needed
Post by: reuelt on March 21, 2019, 07:01:22 AM

Ask these people
https://github.com/teodoryantcheff/SolidCam-Mach3-Post

and follow this thread
https://www.machsupport.com/forum/index.php?topic=1614.0