Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: rockyrude on March 11, 2019, 02:53:49 PM

Title: mach 3 turn
Post by: rockyrude on March 11, 2019, 02:53:49 PM

Sorry, I didn't see a turn specific area. I am a new user to mach3 turn, I have noticed turn is doubling my part size. For example my part has a radius of 5.5 inches in lazy turn when I bring it into mach3 turn it becomes 11.0 inches. Is there a setting I missed?

Title: Re: mach 3 turn
Post by: JohnHaine on March 11, 2019, 05:22:05 PM

Sounds like you're in radius mode rather than diameter...