Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: Stuart on December 21, 2018, 02:33:28 AM
-
Hi
Let me explain the problem
I am interested in purchasing a lic. For the above note I use mach4 hobby on the mil so I know how to set up and use the platform .
Reasons for the change I could use some of its features for a up coming project .
Now the problem the screen set is flawed
The spindle override do not work at all
The offsets page all the set offsets do not work , the fixture table does not show up nor does the tool table
The table from the menu bar wil not show any data filled in from the offsets page
Edit shows a empty tab this just needs filling in with the screen editor
But this is a 1400 dollar program and it’s on the site try before you buy but it don’t work so how can I test it out
As a test I dropped on the screen from my hobby setup and it worked ok
The faults in the industrial are in the release and the newest in the ftp
I have emailed Newfangled about this but as yet I have not had a reply yet
Stuart
-
Had a reply looks like they have a fix , I will try it out grats to Bryanna
-
Can you test Inudstrial Features in Demo now?
I know when I tried to test a few Macros it wouldn't allow me to run the G Code because the feature was not licensed.
-
Don’t know yet . It was evening meal time when I got the reply with the fix , when it’s day light and I have woken up I am going to give it a go