Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: kf2qd on December 07, 2018, 10:25:46 PM

Title: Suggestion for PCI Parallel Port
Post by: kf2qd on December 07, 2018, 10:25:46 PM

I have been having problem with Mach3 shutting down Generally just after a tool change. I wind up back at Windows with no errors. I am running a Sieg KX3 with an Ethernet Smoothstepper. I have reloaded Mach3 and it still acts up.

I want to try and simplify things to see if I can isolate the problem.

Title: Re: Suggestion for PCI Parallel Port
Post by: TPS on December 08, 2018, 12:31:35 PM

http://forum.machsupport.com/forum/index.php/topic,38914.msg262502.html#msg262502