Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: plasmashine on April 16, 2018, 03:06:22 AM

Title: M03 Not working
Post by: plasmashine on April 16, 2018, 03:06:22 AM

Hi
Ive just been upgrading my plasma table, but I must have inadvertantly changed a setting somewhere.

When I click 'spindle toggle' in diagnostics it turns on and off my plasma 'cut' relay.

But when I type in M03 or M04 it doesn't operate.
Also if I turn on the relay with the screen button it won't switch off with M05

Could someone just give me a nudge?

Title: Re: M03 Not working
Post by: Tweakie.CNC on April 16, 2018, 03:34:11 AM

This can be caused by a corruption to the .xml file. Try Operator / Restore Settings and roll back to an earlier time (before the problem occurred).

Tweakie.

Title: Re: M03 Not working
Post by: TPS on April 16, 2018, 03:42:23 AM

or lost files, have a look here:

http://www.machsupport.com/forum/index.php/topic,36874.0.html

Title: Re: M03 Not working
Post by: plasmashine on April 16, 2018, 05:16:02 AM

Thanks I think it may be a corrupt file.