Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: litronics on March 15, 2018, 01:07:21 PM

Title: Rotating tool path
Post by: litronics on March 15, 2018, 01:07:21 PM

Hi all,

I am coming from WinPC NC and just started to use MACH4.
From the WinPC interface I have the option to rotate the tool path in 90° steps to align it on the workarea.

Am I not seeing this option in MACH or is it not possible?

Thanks for your help!

Title: Re: Rotating tool path
Post by: joeaverage on March 15, 2018, 01:43:53 PM

Hi,
try looking up G68.

Craig