Machsupport Forum

Mach Discussion => VB and the development of wizards => Topic started by: birillo1959 on March 15, 2018, 06:25:49 AM

Title: edit m3.m1s
Post by: birillo1959 on March 15, 2018, 06:25:49 AM

hello, I have a problem with the spindle, when I start machining the spindle still has not reached the speed that the tool touches on the piece, could you change m3.m1s?

Title: Re: edit m3.m1s
Post by: TPS on March 15, 2018, 06:34:06 AM

no,

Config  -> Ports&Pins -> Spindle Setup

Title: Re: edit m3.m1s
Post by: birillo1959 on March 15, 2018, 07:03:57 AM

OK it works!
thanks always very kind !!!!!!!! ;)