Machsupport Forum

Third party software and hardware support forums. => Third party software and hardware support forums. => Topic started by: drut on July 12, 2007, 05:06:51 PM

Title: 8 wires
Post by: drut on July 12, 2007, 05:06:51 PM

can someone give me a bit of advice as to which wires are connected together and which ones are connected to the driver boards im at a loss, me and wires dont get on very well, i have the 2.8 A motors and they have 8 wires.

many thanks

drut

Title: Re: 8 wires
Post by: DennisCNC on July 12, 2007, 07:26:16 PM

You can start by connecting them bipolar half winding.  Take the A and A# on the motor and connector the same terminals on the drives and do the same with the B and B#.