Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: Chip on July 10, 2007, 01:53:57 AM

Title: LazyCam 2.01.1
Post by: Chip on July 10, 2007, 01:53:57 AM
Hi, Art & Brian

After renaming the Extent from .1Exe to .Exe, LazyCam installed just fine  ::).

1.Shape files Save now  :o, But on load Shape File I get this below, Yellow shape  ;D,

The original shape is the light blue, The only way I could get it to hold this shape is with the left mouse button held down.

Let it up and it reverts to the yellow shape  :'(.

Chip
Title: Re: LazyCam 2.01.1
Post by: Brian Barker on July 10, 2007, 05:47:40 PM
well I must say I have never seen that!

very odd... do  you get the same probem with other files?
Title: Re: LazyCam 2.01.1
Post by: Chip on July 10, 2007, 08:21:57 PM
Hi, Brian

Yes, Add the .shp to upload files extents and I'll post some.

I think it just has to do with arc's, Circles seem fine.

Thanks, Chip