Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: Elnino on July 04, 2007, 07:46:16 PM

Title: LC 2.080 not posting full Gcode
Post by: Elnino on July 04, 2007, 07:46:16 PM

I'm trying to convert a simple DXF into Gcode and it seems to only want to write 50 lines of code.  I'm not sure if it's crashing out and failing to write the file or if Is this a deliberate thing?

The job is 4 layers - Holes, inside, slots and outside.  There are only 2 chains on the inside (cut second).  It finishes the first chain and then has a few G40's and G42's and that's it.  Seems a little weird so at the moment i'm seeing it as a bug and not a feature.

This same DXF worked ok on previous versions of LC ok.

I can post the DXF if you like.

Title: Re: LC 2.080 not posting full Gcode
Post by: Chip on July 04, 2007, 08:40:19 PM

Hi, Elnino

Post your DXF

Thanks, Chip

Title: Re: LC 2.080 not posting full Gcode
Post by: Chaoticone on July 04, 2007, 08:57:27 PM

I think the free version of LC will only give 50 lines. If you have bought a Mach licenses, I think it should work.

Brett

Title: Re: LC 2.080 not posting full Gcode
Post by: Brian Barker on July 05, 2007, 12:40:32 PM

Yup... If there is no Mach3 Lic on your system it will only output 50 lines of code... If you have a Pro lic that will also Lift the 50 line limit...

Thanks
Brian