Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Beige on June 23, 2017, 11:35:40 AM

Title: Go to a coordinate
Post by: Beige on June 23, 2017, 11:35:40 AM

Hi,

I've just changed from TurboCNC to Mach3.
On TurboCNC jog mode, there is a "go to..." function,
that we can put a coordinate to go that position.
(For example, I choose X axis's "go to..." and write "30" then machine goes to X30.)

On Mach3, how can I get the same function?

Otherwise everything goes fine, I'm happy to change to Mach3!
Thank you in advance for your replies ;)!

Title: Re: Go to a coordinate
Post by: joeaverage on June 23, 2017, 06:57:30 PM

Hi,
on the NFS website find
Mach3Mill_1.84.pdf (ftp://Mach3Mill_1.84.pdf)

Chapters 6 and 10 probably most immediately useful to you.

Craig

Title: Re: Go to a coordinate
Post by: Beige on June 24, 2017, 06:49:32 AM

Thank you, I got it!