Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: rrc1962 on May 18, 2017, 09:30:24 AM

Title: Multiple Probes
Post by: rrc1962 on May 18, 2017, 09:30:24 AM

In the pin setup I see Probe, Probe1, Probe2 and Probe3 on the M4 and ESS setup.  I know G31 works with Probe.  Would G31.1 be used with Probe1, G31.2 for Probe2, etc.?

Thanks

Title: Re: Multiple Probes
Post by: DazTheGas on May 18, 2017, 12:55:58 PM

Simple answer

Your Correct ;-)

DazTheGas

Title: Re: Multiple Probes
Post by: rrc1962 on May 18, 2017, 02:00:12 PM

Cool.  I thought that was the case but thought I'd ask before chasing that rabbit through the hole.

Title: Re: Multiple Probes
Post by: rrc1962 on May 18, 2017, 02:02:32 PM

Daz...

You wouldn't happen to know anything about Reverse Run in M4 would you?