Machsupport Forum

Mach Discussion => Mach3 under Vista => Topic started by: fatman on April 27, 2017, 06:37:59 PM

Title: How to delete a *tap enrgaving program from Text Engraving V4 add on?
Post by: fatman on April 27, 2017, 06:37:59 PM

My buddy's Mach3 program had the encoder position way the heck off the table (X-235 , Y-65) and he didn't catch it before he wrote a simple engraving program with the Text Engraving add on. The problem is , of course that the resulting program tried to run off the table to X-210 and Y-45 on almost every line. I have re zeroed the encoder position (in Settings), and the Tool Path position, as well as the Tool Offsets , but every engraving program we write has the X-210 and Y-45 error built in. Any suggestions? We would like to delete the offending program stored in "Recent files" but have had zero success doing so.