Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Jimchi52 on April 15, 2017, 10:30:23 PM

Title: Ess smoothstepper
Post by: Jimchi52 on April 15, 2017, 10:30:23 PM

Stopped three times today while running a program.Other times it runs fine.I switched my older machine from usb to ess and it runs fine.Help

Title: Re: Ess smoothstepper
Post by: joeaverage on April 16, 2017, 01:26:38 AM

Hi,
sounds like the buffer (instruction queue) is running out. Extend the buffer length.

Craig

Title: Re: Ess smoothstepper
Post by: Jimchi52 on April 16, 2017, 10:59:02 AM

Running finish cut now. See what happens today

Title: Re: Ess smoothstepper
Post by: olf20 on April 17, 2017, 07:25:09 AM

Goto Warp9 web site and post your problem.
The guys there are very helpful.
olf20 / Bob

Title: Re: Ess smoothstepper
Post by: fixittt on April 20, 2017, 10:46:10 AM

Set your watchdog timer to 3.1

I have gone round and round with this issue on our clients machines when the SS came out.

Changing to the UC********* products have totally remedied this.