Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: weyepx on April 08, 2017, 11:25:48 AM

Title: Ports & Pins
Post by: weyepx on April 08, 2017, 11:25:48 AM

I can't get the software to communicate to the Breakout board and work the machine.
I used software from Planet-CNC and it will work using USB from PC to the Breakout board (BOB).
I want to use MACH3, but can't get either a USB or DB25 serial port connector to work.

Using Windows 7-32 bit.
Software and driver test successful.
Using keyboard with MACH3, successful.
Communicate and operate through the BOB, unsuccessful.

Any and all help is appreciated.

Title: Re: Ports & Pins
Post by: kolias on April 08, 2017, 03:02:32 PM

Which software does not communicate with the BOB? What kind BOB you have? What kind PC you have?