Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: mgreb on March 14, 2017, 09:10:03 PM

Title: cannot get mach3 turn to home
Post by: mgreb on March 14, 2017, 09:10:03 PM

I have just added homing switches to my lathe, cannot get the lathe to home.  I have looked at everything I can think of, but nothing seems to work.   If I load the mach3 as a milling program and press the home all button  starts to home. 

Title: Re: cannot get mach3 turn to home
Post by: mgreb on March 14, 2017, 11:12:41 PM

Nevermind.  seem to have gotten it fixed one of those things were I don't really know what I did.