Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: wwenter on February 19, 2017, 08:53:41 PM
-
I thought this should be easy lathe off set master tool 1. I read the manual watched the video. I homed machine to limit switches then turned a one diameter MDI T0101 tool 1 loaded 1 active set to 1.000 off set brought up tool off set chart high lighted X in tool 1 hit 1.000 off set button dro changed to -1.0416 and the x in tool chart didn't change.
Again I have mist some thing need some help
Thanks