Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: MarkC on June 10, 2007, 07:56:56 PM

Title: Screen 4 for lathe
Post by: MarkC on June 10, 2007, 07:56:56 PM

Hi,
Does the command"set next line" not work in lathe (V2.0.040)?
I added a button to my screen and when I press it I get the diologue and menu for"run from here"

Thanks in advance

Title: Re: Screen 4 for lathe
Post by: Brian Barker on June 11, 2007, 09:53:29 AM

I don't think it will work :(

We will have to redo that section of code to get that working in Lathe.

Thanks
Brian

Title: Re: Screen 4 for lathe
Post by: MarkC on June 11, 2007, 08:31:31 PM

OK
Thanks Brian, I think I've found out how to post code so I can use the "Run From Here" command instead

Mark

Title: Re: Screen 4 for lathe
Post by: Chip on June 12, 2007, 10:24:55 AM

Hi, Mark

Hears a Turn.Lset based on mill screens with added big screen and Lathe Tab pop-out MPG, It's a work in progress .Lset

Had to Zip it, Hay Brian when you get time could you Add .Lset to file Up-Load Options Hear, Thanks.

Hope this Helps, Chip

Title: Re: Screen 4 for lathe
Post by: Hood on June 12, 2007, 03:36:30 PM

Hi Chip, I have added lset to the list, hope it works.
Hood

Title: Re: Screen 4 for lathe
Post by: MarkC on June 12, 2007, 08:46:17 PM

Hey Chip Thanks.
I've been wanting to do a screenset based on mill for the lathe. This gives me a head start

Mark

Title: Re: Screen 4 for lathe
Post by: Chip on June 12, 2007, 09:57:35 PM

Hi, Hood & Mark

Looks like it works

Working on the Lset when time permits, enjoy.

Thanks, Chip