Machsupport Forum

Mach Discussion => VB and the development of wizards => Topic started by: majunmajun on January 05, 2017, 03:28:17 AM

Title: DRO Function
Post by: majunmajun on January 05, 2017, 03:28:17 AM

Hi there

I realise there are different ways to get DRO value, for example, to get the current tools number, we can use oldTool = GetOEMDRO(1200) or oldTool = GetDRO(24), which one is better?

Does someone have a new list of DRO,LED, Button? I found information from Mach3Wiki, but last change was in July 2010. I am afraid there are some information missing.   

Thanks, Jun

Title: Re: DRO Function
Post by: ger21 on January 05, 2017, 07:28:25 AM

GetOEMDRO is the newer version, but it doesn't really matter which one you use.
If you search through the forum here, you can probably fins a more updated list, but the Wiki should have about 99% of the codes.

Title: Re: DRO Function
Post by: majunmajun on January 05, 2017, 09:11:37 AM

Thanks Gerry, on the Wiki OEMDRO is up to number 836, but it works also with 1200, I don't know where i can find the definition/function of such OEMDRO.