Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Stuart on June 24, 2016, 10:13:19 AM

Title: Save Profile
Post by: Stuart on June 24, 2016, 10:13:19 AM

Sorry for a dumb question but how do I save the configuration when I have it set up

In Mach3 I store the xml file off the pc , what do I need to save in Mach4

Stuart

Title: Re: Save Profile
Post by: Steve Stallings on June 24, 2016, 11:06:40 AM

There is a function in Mach4 to capture all the configuration information into a
single file. It can be found at:

HELP > Support > Package Current Profile

This will produce a file with the current profile name and an extension of m4prof.

You will be offerd a choice of where to save this file. It is actually a zip file and if
you change the extension you can open it in a zip viewer to see what is in it
if you desire.

To restore it on a new system, first install Mach4, then use the Mach4Loader
to import the profile using the button at the bottom right of the loader window.

Steve Stallings
PMDX

Title: Re: Save Profile
Post by: Stuart on June 24, 2016, 11:43:16 AM

Thank you Steve for your prompt answer

Now I can get a BU of it done

Stuart