Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: tomltom on March 11, 2016, 02:32:18 AM

Title: Pokeys pin setup
Post by: tomltom on March 11, 2016, 02:32:18 AM
Does anyone have any info on pokeys pins.
By default pokeys plugin for M4 set home status to pokeys pulse engine home status.
The same for limits.

(https://dl.dropboxusercontent.com/u/60701703/Foren/Pic1.png)

Which are the correct physical pin on the pokeys for home and limit status?

Tom
Title: Re: Pokeys pin setup
Post by: cncman172 on March 11, 2016, 08:08:51 AM
The physical pins on pokeys are programmed in the unit for their given function.  Some pins are fixed for only input/outputs, etc.   You can download the view of your device and run the pokey windows application which will show you how the device is currently programmed.

Russ