Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: subbzero on February 10, 2016, 09:26:05 AM
-
Hi
I'm Daniel, just registered
I've got Chinese CNC router 2030 using Mach3 software , and still learning how to use it
But I have an issue, that is the reason I have registered my self today.
I use Artcam Express to create shapes, but when I load G codes, (even examples in Mach3 ) and start the router it's engraving deformed shapes, "Y" direction stretched.
Wandering if anyone can help me solve that.
Thanks
Best regards
-
:)
-
:),
-
:) :)
-
;)
-
Your steps/unit is probably set wrong for the Y xis.
-
Go to YouTube and search for axis calibration.
Here's one to get you started
https://www.youtube.com/watch?v=XkO5tc-jSxw
-
Thanks guys for the useful info.
Best regards.